S411 DIG IND
DIGITAL INDUCTIVE CONDUCTIVITY SENSOR
FEATURES
- Operates in dirty water conditions up to 1 siemens
- Easily interfaced with data acquisition systems courtesy of Modbus RTU RS485 protocol
- Presence of four possible scales with one or two-point calibration
- Robust body in loaded PP
- Immediate installation
APPLICATIONS
- Wastewater
- Primary waters
- Cooling towers
TECHNICAL SPECIFICATION
| Feature | Description |
|---|---|
| Measurement Range | 0.5...1.000 mS/cm |
| Accuracy | ± 6% on the measuring point |
| Repeatability | ± 3% |
| Response Time (T90) | <60s |
| Operating Temperature | -10...60°C |
| Operating Pressure | From vacuum to 6.5 bar |
| Body Material | Glass-filled PP, PPS, Viton® O-ring |
| Mechanical Protection | IP68 (Sensor & cable) / IP67 Connector |
| Power Supply | 12-24 Vdc |
| Cable | 10 mt |
| Signal Interface | RS485 Modbus RTU protocol |
| Thread | 1” 1/2 GAS BSP |
| Measurement Method | Inductive without contact electrodes |
| Temperature Compensation | Automatic with built-in PT1000 |
| Salinity | 0-120g/kg (programmable conversion factor default 0.64) |